Accessory Box

V2 Air Assist - Accessory Box

V2 Air Assist - Accessory Box

Free shipping to all US States

Other shipping destinations 

are available for an additional cost.


EXPECTED SHIPMENT WITHIN 1 WEEK FROM TIME OF ORDER PLACEMENT, UNLESS COMBINED WITH A KIT THEN 2-3 WEEKS

V2 AIR ASSIST - ACCESSORY BOX

THE ACCESSORY BOX IS A DIRECT PLUG AND PLAY WITH ALL V2 BOARDS. HOWEVER, A SPECIAL CABLE IS NEEDED FOR V2 R0 AND V2 R1 BOARDS. CONTACT US IF YOU HAVE A R0 OR R1 BOARD TO ENSURE YOU GET THE CORRECT CABLE.


What the accessory box is:  

The accessory box is used with the Laser Artifex V2 air assist board to control peripheral equipment such as a chiller and exhaust fan. There are two circuits on the board, with a limit of 7.5 amps on each circuit.

The V2 Air Assist - Accessory Box has the following features:


Ideally, the settings are set so that you don’t have to deal with turning on multiple components to get started, and then remember to turn them off when you are finished. Once the laser is turned on, everything is operational and ready for operation.


Box Installation

The kit is designed for ease of installation and most installations require minimal or no wiring changes. It is recommended to review the installation instructions provided below before purchasing.

V2 Air Assist - Accessory Box Instructions - R0 

V2 Air Assist - Accessory Box Instructions - R1 

V2 Air Assist Video - COMING SOON


V2 Air Assist - Accessory Box Components